Hello ,

Philip Warner's 2022 Toyota Hilux, a 2.8L Turbo Diesel, was experiencing some serious problems. The car would crank, but would not start! What's even more frustrating is that he tried scanning his vehicle with a YOUCANIC scanner, but no codes came up. Philip had to roll up his sleeves and find the problem himself. It turns out that one of the fuel lines had been installed improperly, which was causing the problem. Keep reading here!

Have you recently fixed a problem in your car? Encourage other DIY enthusiasts by Submitting Your Success Story! All you need to do is write a couple of short paragraphs about your fix, take a few photos, and we'll take care of the rest!

 Light of the Week

Loose Wheel Warning Light - Audis now come equipped with a light that can sense and signal to the driver when the car has a loose wheel. This technology is fairly new, being integrated into select Audi models starting in 2019, and will most likely be introduced into more cars as the technology improves.

DIY Guide of the Week

Oh no! Is your car still running even though you've turned the ignition off? Most likely, the problem could be electrical. Make sure your vehicle is parked in a safe place, and check your fuse box! Please do not try to unplug the battery; your car might not start up again afterwards. Keep reading here!

⚡Need a Boost?

The YOUCANIC Pro 6000A Jump Starter helps you get your car going in a pinch!

✅ Spark-proof technology for worry-free use

✅Reverse polarity protection to prevent damage

✅8-point safety system for maximum reliability

Buy now for $149.99!

Keep those wrenches turning ! We will be back next week with more repair tips. Remember to share your car repair success story with us for a chance to win a free YOUCANIC Pro jump starter.

Best regards,

Team YOUCANIC